Product Description

Heat Shrink – Adhesive Lined – 3/8″ Nominal

This is the good stuff.

Adhesive lined, and you can really see the adhesive ooze out when shrunk down, confirming a good seal.  Can use a lighter or torch but this heat gun is best to prevent burning.

Easily cut to size as needed with scissors.  Expect to use roughly 1″ per “regular” connection.

Fits 16AWG up to about 8AWG, but 16 AWG is probably the smallest you’d want to go on this, you really have to shrink it all the way down to get a good seal.  If you have to, you can stretch it a bit with needle nose to fit over a larger lug prior to shrinking.

3:1 Shrink Ratio.

Unshrink ID: 0.410″

Shrink ID: 0.130″